Cold weather response tips for EMS
Updated December 19, 2016
Even though winter seems like it been here for months, we still have quite awhile to go before spring. While cold and snow may be great for holiday festivities, they make emergency response more complex and potentially dangerous. I have lived in the frozen tundra of Wisconsin for most of my life. These are a few of my cold weather response tips.
1. Your safety is number one.
Always have cold weather gear with you in the ambulance. I like to keep a small duffel bag that includes windproof/water resistant pants, a thermal liner for my uniform coat and a sweatshirt. I keep a fleece hat and heavy fleece gloves on my person at all times.
2. Slow down.
Reduce your speed and increase your following distance when driving any emergency vehicle on snow- and ice-covered roads. Decelerate by removing your foot from the accelerator and then gently braking.
3. Move with purpose.
Plan the lifts down the front porch steps, over the snow/ice covered sidewalk and through the snow-filled driveway to the ambulance in the road before leaving the house. Move slower and more purposefully when walking on snow- and ice-covered surfaces. A simple trip or fall could at the least give you wet pants. At the worst it could cause you to drop or tip your patient.
4. Protect the patient.
Use a blanket instead of a thin sheet below the patient and add an extra blanket or three over the patient. Shape a large bath towel as a hood around the patient's head. Pull the towel over the patient's face if it is snowing or sleeting.
5. Set temperature for the patient.
Adjust the thermostat in the ambulance's patient care compartment so it is uncomfortably warm for EMS providers.
Bonus tip: Goose feather blizzard.
Never, ever cut through goose down clothing inside the ambulance.
Finally, check out this column on improving patient heat retention and heat gain while minimizing heat loss and watch this video demonstration of how to create a hypowrap to help any patient in a cold environment minimize heat loss and retain the heat they are producing.